[BRLTTY] trying to install
Martin Beran
jazzeman at seznam.cz
Sun Dec 18 12:44:26 EST 2022
Hello,
I am really a beginner in BRLTTY so I don't know which script is used or
where can I switch them.
Brltty.conf is attached below.
Martin.
Dne 18.12.2022 v 18:17 Dave Mielke napsal(a):
>
> Are you using the run-brltty script? If so, could you rather use the debug-brltty script and then post the brltty.log file? Also, could you please post your brltty.conf file?
>
-------------- next part --------------
# Documents/brltty.conf. Generated from brltty.conf.in by configure.
###############################################################################
# BRLTTY - A background process providing access to the console screen (when in
# text mode) for a blind person using a refreshable braille display.
#
# Copyright (C) 1995-2022 by The BRLTTY Developers.
#
# BRLTTY comes with ABSOLUTELY NO WARRANTY.
#
# This is free software, placed under the terms of the
# GNU Lesser General Public License, as published by the Free Software
# Foundation; either version 2.1 of the License, or (at your option) any
# later version. Please see the file LICENSE-LGPL for details.
#
# Web Page: http://BRLTTY.app/
#
# This software is maintained by Dave Mielke <dave at mielke.cc>.
###############################################################################
# This is a configuration file template for the BRLTTY application.
# Uncomment those entries which apply to your personal needs and system
# requirements.
# BRLTTY expects to find its configuration file in "//etc/brltty.conf"
# (can be overridden with the --configuration-file= [-f] option).
# If it doesn't exist, then BRLTTY silently continues but may require
# that certain command line options be explicitly supplied.
# Blank lines are ignored. The character '#', anywhere on a line,
# initiates a comment; all characters from it to the end of that line
# are ignored.
# Each configuration entry consists of a keyword followed by its operand.
# An arbitrary amount of white space, (blanks and/or tabs), may occur
# before the keyword, as well as before and after the operand. Keyword
# processing isn't case sensitive. Examples of valid entries are:
#
# Braille-Driver pm # Papenmeier braille displays.
# braille-device serial:COM1 # The first serial device.
# SPEECH-DRIVER fv # The Festival Text to Speech System.
# The default settings given within the following descriptions assume no
# special build options (see "./configure --help" in the top-level
# directory of the source tree.
####################
# Braille Settings #
####################
# The braille-driver directive specifies the two-letter driver
# identification code of the driver for the braille display.
# If not specified, autodetection will be performed.
# If more than one driver, separated by commas, is specified,
# then autodetection will be performed amongst them.
# (can be overridden with the --braille-driver= [-b] option)
#braille-driver auto # autodetect
#braille-driver al # Alva
#braille-driver at # Albatross
#braille-driver ba # BrlAPI
#braille-driver bc # BrailComm
#braille-driver bd # Braudi
#braille-driver bl # BrailleLite
#braille-driver bm # Baum;; Refreshabraille, Orbit, NLS eReader Zoomax, NBP B2G
#braille-driver bn # BrailleNote
#braille-driver cb # CombiBraille
#braille-driver ce # Cebra
#braille-driver cn # Canute
#braille-driver ec # EcoBraille
#braille-driver eu # EuroBraille
#braille-driver fa # FrankAudiodata
#braille-driver fs # FreedomScientific; VFO, Vispero
#braille-driver hd # Hedo
#braille-driver hm # HIMS
#braille-driver ht # HandyTech; HelpTech
#braille-driver hw # HumanWare;; APH Chameleon, APH Mantis, NLS eReader
#braille-driver ic # Inceptor; Innovision
#braille-driver ir # Iris
#braille-driver lb # Libbraille
#braille-driver lt # LogText
#braille-driver mb # MultiBraille
#braille-driver md # MDV
#braille-driver mm # BrailleMemo
#braille-driver mn # MiniBraille
#braille-driver mt # Metec
#braille-driver np # NinePoint
#braille-driver pg # Pegasus
#braille-driver pm # Papenmeier
#braille-driver sk # Seika
#braille-driver tn # TechniBraille
#braille-driver ts # TSI
#braille-driver vd # VideoBraille
braille-driver vo # Voyager;; Braille Pen, Easy Link
#braille-driver vs # VisioBraille
# The braille-device directive specifies the device to which the braille
# display is connected. The generic syntax is type:device. The device
# type is optional, and, for backward compatibility, defaults to serial.
# The following devices are supported (brackets indicate optionality):
# serial:path (relative paths are anchored at "/dev")
# usb:[serial-number]
# bluetooth:address
# If not specified, "usb:,bluetooth:" will be used.
# If more than one device, separated by commas, is specified,
# then each of them will be probed in turn.
# (can be overridden with the --braille-device= [-d] option)
#braille-device serial:COM1 # First serial device.
braille-device usb: # First USB device matching braille driver.
#braille-device usb:nnnnn # Specific USB device by serial number.
#braille-device bluetooth: # First paired Bluetooth device matching braille driver.
#braille-device bluetooth:xx:xx:xx:xx:xx:xx # Specific bluetooth device by address.
# NOTE: If the device is connected via a serial-to-USB adapter then setting
# braille-device to usb: will not work. In this case, you needs to identify the
# virtual serial device which the kernel has created for the adapter, i.e. to
# something like serial:ttyUSB0 or ttyACM0 (see the kernel messages on device
# plug to get the actual device name).
# The release-device directive specifies whether or not the device to which the
# braille display is connected is to be released when the current screen or
# window can't be read by BRLTTY. If not specified, "on" will be used on Windows
# platforms and "off" will be used on all other platforms.
# (can be overridden with the --release-device [-r] option)
#release-device on # Release the device.
#release-device off # Don't release the device.
# The text-table directive specifies which text table to use. Relative paths
# are anchored at "//etc/brltty/Text". If not specified, locale-based
# autoselection with fallback to "en-nabcc" will be performed.
# (can be overridden with the --text-table= [-t] option)
#text-table auto # locale-based autoselection
#text-table ar # Arabic (generic)
#text-table as # Assamese
#text-table awa # Awadhi
#text-table bg # Bulgarian
#text-table bh # Bihari
#text-table bn # Bengali
#text-table bo # Tibetan
#text-table bra # Braj
#text-table brf # Braille Ready Format (for viewing .brf files within an editor or pager)
#text-table cs # Czech
#text-table cy # Welsh
#text-table da # Danish
#text-table da-1252 # Danish (Svend Thougaard, 2002–11–18)
#text-table da-lt # Danish (LogText)
#text-table de # German
#text-table dra # Dravidian
#text-table el # Greek
#text-table en # English
#text-table en_CA # English (Canada)
#text-table en_GB # English (United Kingdom)
#text-table en_US # English (United States)
#text-table en-nabcc # English (North American Braille Computer Code)
#text-table eo # Esperanto
#text-table es # Spanish
#text-table et # Estonian
#text-table fi # Finnish
#text-table fr # French
#text-table fr_CA # French (Canada)
#text-table fr_FR # French (France)
#text-table fr-2007 # French (unified 2007)
#text-table fr-cbifs # French (Code Braille Informatique Français Standard)
#text-table fr-vs # French (VisioBraille)
#text-table ga # Irish
#text-table gd # Gaelic
#text-table gon # Gondi
#text-table gu # Gujarati
#text-table he # Hebrew
#text-table hi # Hindi
#text-table hr # Croatian
#text-table hu # Hungarian
#text-table hy # Armenian
#text-table is # Icelandic
#text-table it # Italian
#text-table kha # Khasi
#text-table kn # Kannada
#text-table kok # Konkani
#text-table kru # Kurukh
#text-table lt # Lituanian
#text-table lv # Latvian
#text-table mg # Malagasy
#text-table mi # Maori
#text-table ml # Malayalam
#text-table mni # Manipuri
#text-table mr # Marathi
#text-table mt # Maltese
#text-table mun # Munda
#text-table mwr # Marwari
#text-table ne # Nepali
#text-table new # Newari
#text-table nl # Dutch
#text-table nl_BE # Dutch (Belgium)
#text-table nl_NL # Dutch (Netherlands)
#text-table no # Norwegian
#text-table no-generic # Norwegian (with support for other languages)
#text-table no-oup # Norwegian (Offentlig utvalg for punktskrift)
#text-table nwc # Newari (old)
#text-table or # Oriya
#text-table pa # Panjabi
#text-table pi # Pali
#text-table pl # Polish
#text-table pt # Portuguese
#text-table ro # Romanian
#text-table ru # Russian
#text-table se # Sami (Northern)
#text-table sa # Sanskrit
#text-table sat # Santali
#text-table sd # Sindhi
#text-table sk # Slovak
#text-table sl # Slovenian
#text-table sv # Swedish
#text-table sv-1989 # Swedish (1989 standard)
#text-table sv-1996 # Swedish (1996 standard)
#text-table sw # Swahili
#text-table ta # Tamil
#text-table te # Telugu
#text-table tr # Turkish
#text-table uk # Ukrainian
#text-table vi # Vietnamese
# The contraction-table directive specifies which contraction table to use.
# Relative paths are anchored at "//etc/brltty/Contraction". If not specified, no
# contraction table will be available.
# (can be overridden with the --contraction-table= [-c] option)
#contraction-table auto # locale-based autoselection
#contraction-table af # Afrikaans (contracted)
#contraction-table am # Amharic (uncontracted)
#contraction-table de # German
#contraction-table de-g0 # German (uncontracted)
#contraction-table de-g1 # German (basic contractions)
#contraction-table de-g2 # German (contracted)
#contraction-table de-1998 # German (contracted - 1998 standard)
#contraction-table de-2015 # German (contracted - 2015 standard)
#contraction-table en # English
#contraction-table en_US # English (United States)
#contraction-table en-ueb-g1 # English (Unified, uncontracted)
#contraction-table en-ueb-g2 # English (Unified, contracted)
#contraction-table en-us-g2 # English (United States, contracted)
#contraction-table es # Spanish (contracted)
#contraction-table fr # French
#contraction-table fr-g1 # French (uncontracted)
#contraction-table fr-g2 # French (contracted)
#contraction-table ha # Hausa (contracted)
#contraction-table id # Indonesian (contracted)
#contraction-table ipa # International Phonetic Alphabet
#contraction-table ja # Japanese (uncontracted)
#contraction-table ko # Korean
#contraction-table ko-g0 # Korean (uncontracted)
#contraction-table ko-g1 # Korean (partially contracted)
#contraction-table ko-g2 # Korean (contracted)
#contraction-table lt # Lithuanian (uncontracted)
#contraction-table mg # Malagasy (contracted)
#contraction-table mun # Munda (contracted)
#contraction-table nl # Dutch (contracted)
#contraction-table ny # Chichewa (contracted)
#contraction-table pt # Portuguese (contracted)
#contraction-table ru # Russian (contracted)
#contraction-table si # Sinhalese (uncontracted)
#contraction-table sw # Swahili (contracted)
#contraction-table th # Thai (contracted)
#contraction-table zh_TW # Chinese (Taiwan, uncontracted)
#contraction-table zu # Zulu (contracted)
# The attributes-table directive specifies which attributes table to use.
# Relative paths are anchored at "//etc/brltty/Attributes". If not specified,
# "left_right" will be used.
# (can be overridden with the --attributes-table= [-a] option)
#attributes-table left_right # foreground colour in the left column and background colour in the right column
#attributes-table invleft_right # inverse foreground colour in the left column and background colour in the right column
#attributes-table upper_lower # foreground colour in the upper square and background colour in the lower square
#############################
# Braille Driver Parameters #
#############################
# The braille-parameters directive passes driver-specific parameters
# through to the braille driver.
# (can be specified more than once)
# (can be overridden with the --braille-parameters= [-B] option)
#braille-parameters driver:name=value,...
# Alva Braille Driver Parameters
#braille-parameters al:RotatedCells=no # [no,yes]
#braille-parameters al:SecondaryRoutingKeyEmulation=no # [no,yes]
# BrlAPI Braille Driver Parameters
#braille-parameters ba:Auth=//etc/brlapi.key
#braille-parameters ba:Host=:0
# BrailleLite Braille Driver Parameters
#braille-parameters bl:BaudRate=9600 # [300,600,1200,2400,4800,9600,19200,38400]
#braille-parameters bl:KbEmu=yes # [yes,no]
# Baum Braille Driver Parameters
#braille-parameters bm:Protocol=default # [default,escape,hid1,hid2,ht,pb]
#braille-parameters bm:VarioKeys=no # [no,yes]
# EuroBraille Braille Driver Parameters
#braille-parameters eu:Protocol= # [auto,azerbraille,clio,eurobraille,notebraille,pupibraille,scriba,esys,esytime,iris,esysiris]
# HandyTech Braille Driver Parameters
#braille-parameters ht:SetTime=no # [no,yes]
# Iris Braille Driver Parameters
#braille-parameters ir:Embedded= # [no,yes]
#braille-parameters ir:LatchDelay=10 # [0-100] (tenths of a second)
#braille-parameters ir:Protocol= # [eurobraille,native]
# Libbraille Braille Driver Parameters
#braille-parameters lb:Device=/dev/ttyS0 #
#braille-parameters lb:Driver=auto #
#braille-parameters lb:Table=us.tbl #
# TSI Braille Driver Parameters
#braille-parameters ts:HighBaud=yes # [yes,no]
#braille-parameters ts:SetBaud=9600 # [4800,9600,19200]
# TTY Braille Driver Parameters
#braille-parameters tt:Baud=9600 #
#braille-parameters tt:CharSet=ISO8859-1 #
#braille-parameters tt:Columns=40 # [1-80]
#braille-parameters tt:Lines=1 # [1-3]
#braille-parameters tt:Locale= #
#braille-parameters tt:Term=vt100 # [terminfo]
# VisioBraille Braille Driver Parameters
#braille-parameters vs:Baud=57600 #
#braille-parameters vs:DisplaySize=40 # [20-40]
#braille-parameters vs:PromVersion=4 # [3-6]
# XWindow Braille Driver Parameters
#braille-parameters xw:Columns=40 # [1-80]
#braille-parameters xw:Font=name # []
#braille-parameters xw:Input=off # [off,on]
#braille-parameters xw:Lines=1 # [1-3]
#braille-parameters xw:Model=bare # [bare]
#braille-parameters xw:TkParms= #
###################
# Speech Settings #
###################
# The speech-driver directive specifies the two-letter driver
# identification code of the driver for the speech synthesizer.
# If not specified, autodetection will be performed.
# If more than one driver, separated by commas, is specified,
# then autodetection will be performed amongst them.
# (can be overridden with the --speech-driver= [-s] option)
#speech-driver auto # autodetect
#speech-driver al # Alva
#speech-driver an # Android
#speech-driver bl # BrailleLite
#speech-driver cb # CombiBraille
#speech-driver en # eSpeak-NG
#speech-driver es # eSpeak
#speech-driver fl # FestivalLite
#speech-driver fv # Festival
#speech-driver gs # GenericSay
#speech-driver mp # Mikropuhe
#speech-driver sd # SpeechDispatcher
#speech-driver sw # Swift
#speech-driver th # Theta
#speech-driver vv # ViaVoice; Voxin
#speech-driver xs # ExternalSpeech
# The speech-input directive specifies the name of the file system object
# (FIFO, named pipe, named socket, etc) which can be used by external
# applications for text-to-speech conversion via BRLTTY's speech driver.
# Relative paths are anchored at the current working directory. If not
# specified, the file system object isn't created.
# (can be overridden with the --speech-input= [-i] option)
#speech-input /path/to/file-system-object
# The quiet-if-no-braille directive specifies that the autospeak feature
# isn't to be implicitly enabled when the braille driver is not running.
# (can be overridden with the --quiet-if-no-braille= [-Q] option)
#quiet-if-no-braille off # [off,on]
# The autospeak-threshold directive specifies the minimum screen content
# quality that will trigger the autospeak feature.
# (can be overridden with the --autospeak-threshold= option)
#autospeak-threshold none
############################
# Speech Driver Parameters #
############################
# The speech-parameters directive passes driver-specific parameters through
# to the speech driver.
# (can be specified more than once)
# (can be overridden with the --speech-parameters= [-S] option)
#speech-parameters driver:name=value,...
# eSpeak Speech Driver Parameters
#speech-parameters es:MaxRate=450 # [80-]
#speech-parameters es:Path=
#speech-parameters es:PunctList=
#speech-parameters es:Voice=default
# eSpeak-NG Speech Driver Parameters
#speech-parameters en:MaxRate=450 # [80-]
#speech-parameters en:Path=
#speech-parameters en:PunctList=
#speech-parameters en:Voice=en
# ExternalSpeech Speech Driver Parameters
#speech-parameters xs:Socket_Path=/tmp/exs-data
# Festival Speech Driver Parameters
#speech-parameters fv:Command=festival # [/path/to/command]
#speech-parameters fv:Name= # [kevin,kal]
# FestivalLite Speech Driver Parameters
#speech-parameters fl:Pitch=100 # [50-200]
# GenericSay Speech Driver Parameters
#speech-parameters gs:Command=/usr/local/bin/say
# Mikropuhe Speech Driver Parameters
#speech-parameters mp:Name= # [/path/to/mikropuhe/name.pu5]
#speech-parameters mp:Pitch=0 # [-10-10]
# SpeechDispatcher Speech Driver Parameters
#speech-parameters sd:Language= # [two-letter language code]
#speech-parameters sd:Module= # [flite,festival,epos-generic,dtk-generic,...]
#speech-parameters sd:Name= #
#speech-parameters sd:Port=6560 # [1-65535]
#speech-parameters sd:Voice= # [male1,female1,male2,female2,male3,female3,child_male,child_female]
# Swift Speech Driver Parameters
#speech-parameters sw:Name= # [voice,/path/to/voice]
# Theta Speech Driver Parameters
#speech-parameters th:Age= # [1-99,-1--99]
#speech-parameters th:Gender= # [male,female,neuter]
#speech-parameters th:Language= # [two-letter language code]
#speech-parameters th:Name= # [voice,/path/to/voice]
#speech-parameters th:Pitch=0.0 # [-2.0-2.0]
# ViaVoice Speech Driver Parameters
#speech-parameters vv:Quality= # [fair,poor,good]
#speech-parameters vv:Mode= # [words,letters,punctuation,phonetic]
#speech-parameters vv:Synthesize= # [sentences,all]
#speech-parameters vv:Abbreviations= # [on,off]
#speech-parameters vv:Years= # [on,off]
#speech-parameters vv:Language= # [American-English, British-English, Castilian-Spanish, Mexican-Spanish, Standard-French, Canadian-French, Standard-German, Standard-Italian, Standard-Mandarin-GBK, Standard-Mandarin-PinYin, Standard-Mandarin-UCS2, Taiwanese-Mandarin-Big5, Taiwanese-Mandarin-ZhuYin, Taiwanese-Mandarin-PinYin, Taiwanese-Mandarin-UCS2, Brazilian-Portuguese, Standard-Japanese-SJIS, Standard-Japanese-UCS2, Standard-Finnish, Standard-Korean-UHC, Standard-Korean-UCS2, Standard-Cantonese-GBK, Standard-Cantonese-UCS2, HongKong-Cantonese-Big5, HongKong-Cantonese-UCS2, Standard-Dutch, Standard-Norwegian, Standard-Swedish, Standard-Danish, Standard-Thai-TIS620]
#speech-parameters vv:Voice= # [man,woman,child,patriarch,matriarch]
#speech-parameters vv:Gender= # [male,female]
#speech-parameters vv:HeadSize= # [0-100]
#speech-parameters vv:PitchBaseline= # [40-422 Hz]
#speech-parameters vv:Expressiveness= # [0-100] (pitch fluctuation)
#speech-parameters vv:Roughness= # [0-100]
#speech-parameters vv:Breathiness= # [0-100]
#speech-parameters vv:Volume= # [0-100 %]
#speech-parameters vv:Speed= # [70-1297 wpm]
#####################
# Keyboard Settings #
#####################
# The keyboard-table directive specifies which keyboard table to use. Relative paths are
# anchored at "//etc/brltty/Keyboard". If not specified, no keyboard table is used.
# (can be overridden with the --keyboard-table= [-k] option)
#keyboard-table off # no keyboard table
#keyboard-table braille # bindings for braille keyboards
#keyboard-table desktop # bindings for full keyboards
#keyboard-table keypad # bindings for keypad-based navigation
#keyboard-table laptop # bindings for keyboards without a keypad
#keyboard-table sun_type6 # bindings for Sun Type 6 keyboards
# The keyboard-properties directive specifies which keyboards to monitor.
# If not specified, all keyboards are monitored.
# (can be specified more than once)
# (can be overridden with the --keyboard-properties= [-K] option)
#keyboard-properties Type=any # [any,ps2,usb,bluetooth,internal]
#keyboard-properties Vendor=0X0000 # [0X0000-0XFFFF]
#keyboard-properties Product=0X0000 # [0X0000-0XFFFF]
##################
# Sound Settings #
##################
# The pcm-device directive specifies the device to use for soundcard
# digital audio. If not specified, a method- and system-dependent
# default will be used.
# (can be overridden with the --pcm-device= [-p] option)
#pcm-device /path/to/device # most methods
#pcm-device pcm-handle-id # ALSA (see second parameter of snd_pcm_open)
# The midi-device directive specifies the device to use for the Musical
# Instrument Digital Interface. If not specified, a method- and
# system-dependent default will be used.
# (can be overridden with the --midi-device= [-m] option)
#midi-device /path/to/device # most methods
#midi-device client:port # ALSA (may use number or case-sensitive substring of name)
###################
# Logging Options #
###################
# The quiet directive reduces the logging level to standard error by one
# level and also suppresses the braille and speech driver banners.
# (can be overridden with the --quiet [-q] option)
#quiet off # [off,on]
# The log-file directive specifies the file to which diagnostics are written.
# Relative paths are anchored at the current working directory. If not
# specified, diagnostics are written to the system log.
# (can be overridden with the --log-file= [-L] option)
#log-file /tmp/brltty.log
# The log-level directive specifies which event categories are to be
# logged as well as the severity threshold for uncategorized events.
# The category names and severity threshold are separated by commas.
# (can be overridden with the --log-level= [-l] option)
#log-level notice
# Only one severity threshold may be specified. Less severe uncategorized
# events will not be logged. If not specified, "notice" will be assumed.
# The severity thresholds are:
#log-level emergency
#log-level alert
#log-level critical
#log-level error
#log-level warning
#log-level notice
#log-level information
#log-level debug
# Any number of event categories may be enabled. Prefixing a category name
# with a minus sign [-] disables it (particularly useful if "all" is used).
# The categories are:
#log-level all # enable all of the categories
#log-level inpkts # input packets
#log-level outpkts # output packets
#log-level brlkeys # braille device key events
#log-level kbdkeys # keyboard key events
#log-level csrtrk # cursor tracking
#log-level csrrtg # cursor routing
#log-level update # update events
#log-level speech # speech events
#log-level async # asynchronous event scheduling
#log-level server # BrlAPI server events
#log-level gio # generic I/O
#log-level serial # serial I/O
#log-level usb # USB I/O
#log-level bt # Bluetooth I/O
#log-level hid # Human Interface I/O
#log-level brldrv # braille driver events
#log-level spkdrv # speech driver events
#log-level scrdrv # screen driver events
#######################
# Preference Settings #
#######################
# The preferences-file directive specifies the file in which to save the user's
# preferences. Relative paths are usually anchored at "//var/lib/brltty"
# (can be changed via the updatable-directory directive).
# If not specified, "brltty.prefs" will be used.
# (can be overridden with the --preferences-file= [-F] option)
#preferences-file brltty.prefs
# The override-preferences directive can be used to explicitly specify the
# initial setting of any preference. More than one preference may be overridden
# by separating them by commas and/or by using this directive multiple times.
# (can be specified more than once)
# (can be overridden with the --override-preferences= [-o] option)
#override-preferences preference=setting,...
##########################
# Miscellaneous Settings #
##########################
# The pid-file directive specifies the absolute path to a file that will
# contain BRLTTY's process identifier. It is removed when BRLTTY terminates.
# (can be overridden with the --pid-file= [-P] option)
#pid-file /run/brltty/brltty.pid
# The locale-directory directive specifies the absolute path to the directory
# which contains the compiled message translations for other languages. If not
# specified, "//share/locale" will be used.
# (can be overridden with the --locale-directory= option)
#locale-directory //share/locale
# The updatable-directory directive specifies the absolute path to a directory
# which contains files that can be updated (preferences, saved clipboard, etc).
# If not specified, "//var/lib/brltty" will be used.
# (can be overridden with the --updatable-directory= [-U] option)
#updatable-directory //var/lib/brltty
# The writable-directory directive specifies the absolute path to a directory
# which can be written to (creation of missing but needed resources, etc). If
# not specified, "/run/brltty" will be used.
# (can be overridden with the --writable-directory= [-W] option)
#writable-directory /run/brltty
# The drivers-directory directive specifies the absolute path to the
# directory which contains the dynamically loadable drivers. If not
# specified, //lib/brltty will be used.
# (can be overridden with the --drivers-directory= [-D] option)
#drivers-directory //lib/brltty
# The tables-directory directive specifies the absolute path to the directory
# which contains the text, contraction, attributes, keyboard, and input tables.
# If not specified, "//etc/brltty" will be used.
# (can be overridden with the --tables-directory= [-T] option)
#tables-directory //etc/brltty
# The start-message directive specifies the text to be shown when the braille
# driver starts and to be spoken when the speech driver starts. If not
# specified, "BRLTTY 6.5" will be used.
# (can be overridden with the --start-message= option)
#start-message BRLTTY\s6.5
# The stop-message directive specifies the text to be shown when the braille
# driver stops. If not specified, "BRLTTY stopped" will be used.
# (can be overridden with the --stop-message= option)
#stop-message BRLTTY\sstopped
# The prompt-patterns directive specifies a list of regular expressions
# that are to be used by the NXPROMPT and PRPROMPT navigation commands.
# If not specified, then an exact match of the content of the current line,
# up to and including the first space, will be used.
# (can be specified more than once)
# (can be overridden with the --prompt-patterns= option)
#prompt-patterns regexp,...
# The message-time directive specifies how long a message is to be displayed
# before it's automatically cleared. If not specified, four seconds will be
# used.
# (can be overridden with the --message-time= [-M] option)
#message-time 400 # hundredths of a second
########################
# Privilege Parameters #
########################
# The stay-privileged directive disables switching to an unprivilegdd user
# as well as the relinquishing of any privileges (group memberships,
# capabilities, etc).
# (can be overridden with the --stay-privileged= [-z] option)
#stay-privileged off # [off,on]
# The privilege-parameters directive specifies the default privilege
# establishment parameters to use when BRLTTY is started by a privileged
# user (e.g. by root on a Linux/Unix system). The configured defaults are:
# "".
# (can be specified more than once)
# (can be overridden with the --privilege-parameters= [-Z] option)
#privilege-parameters platform:name=value,...
# Linux Privilege Parameters
#privilege-parameters lx:path=/usr/sbin:/sbin:/usr/bin:/bin
#privilege-parameters lx:scfmode=no # [no,log,fail,kill]
#privilege-parameters lx:shell=/bin/sh
#privilege-parameters lx:user=brltty
################################################
# Application Programming Interface Parameters #
################################################
# The no-api directive disables the Application Programming Interface (API).
# (can be overridden with the --no-api= [-N] option)
#no-api off # [off,on]
# The api-parameters directive passes parameters to the Application
# Programming Interface.
# (can be specified more than once)
# (can be overridden with the --api-parameters= [-A] option)
#api-parameters name=value,...
#api-parameters Auth=keyfile://etc/brlapi.key # Require authentication key
#api-parameters Auth=user:joe # Allow some local user
#api-parameters Auth=group:brl # Allow some local group
#api-parameters Auth=polkit # authenticate via Polkit
#api-parameters Host=:0 # Accept only local Unix connections
#api-parameters Host=0.0.0.0:0 # Accept any internet connection.
#api-parameters StackSize=65536
###################
# Screen Settings #
###################
# The screen-driver directive specifies the two-letter driver
# identification code of the driver for the console screen.
# (can be overridden with the --screen-driver= [-x] option)
#screen-driver an # Android
#screen-driver as # AtSpi
#screen-driver a2 # AtSpi2
#screen-driver em # Terminal Emulator
#screen-driver hd # Hurd
#screen-driver lx # Linux
#screen-driver pb # PcBios
#screen-driver sc # Screen
#screen-driver wn # Windows
############################
# Screen Driver Parameters #
############################
# The screen-parameters directive passes driver-specific parameters through
# to the screen driver.
# (can be specified more than once)
# (can be overridden with the --screen-parameters= [-X] option)
#screen-parameters driver:name=value,...
# AtSpi Screen Driver Parameters
#screen-parameters as:Type=text+terminal # [text,terminal,all]+...
# AtSpi2 Screen Driver Parameters
#screen-parameters a2:Release=yes # [yes,no]
#screen-parameters a2:Type=default # [default,all,{terminal,text}+...]
# Linux Screen Driver Parameters
#screen-parameters lx:Charset=name+... # []
#screen-parameters lx:FallbackText=text # ""
#screen-parameters lx:HFB=auto # [auto,vga,fb,0-7]
#screen-parameters lx:LogSFM=no # [no,yes]
#screen-parameters lx:RpiSpacesBug=no # [no,yes]
#screen-parameters lx:Unicode=yes # [yes,no]
#screen-parameters lx:VT=0 # [0-63]
#screen-parameters lx:WidecharPadding=no # [no,yes]
# Terminal Emulator Screen Driver Parameters
#screen-parameters em:Directory=path # []
#screen-parameters em:Emulator=command # [brltty-pty]
#screen-parameters em:Group=name/number # []
#screen-parameters em:Home=path # []
#screen-parameters em:Path=path # []
#screen-parameters em:Shell=command # [$SHELL]
#screen-parameters em:User=name/number # []
# Windows Screen Driver Parameters
#screen-parameters wn:Root=no # [no,yes]
#screen-parameters wn:FollowFocus=yes # [yes,no]
braille-device USB:
braille-driver vo # Voyager;; Braille Pen, Easy Link
More information about the BRLTTY
mailing list